Davnvile Microetcher II Dental Air Abrasion Sandblaster Polisher Kavo MULTIflex

Description

Davnvile Microetcher II Dental Air Abrasion Sandblaster Polisher Fit Kavo Multiflex
Coupling
Products Description:
TINY polisher makes the surface of porcelain, metal and composite materials Micro-roughened by the alumina powder
before pasting. It improves its adhesive strength.
Installation:
Plug your Kavo quick coupling directly to this unit, the installation is finished.
caution: You must check if there is remaining water in the handpiece cable before installation. If there is, you must dry it
firstly, then install it.
Recommended powder:
We recommend a particle size of 20 to 80 μm high purity powder (99%+).
It's easy for the powder to absorb moisture from the air , It would cause agglomeration, resulting in performance
degradation. After install the powder, you should closed the cover of the bottle immediately to make sure its tight cover.
The dry powder should flow freely, the wet powder does not flow easily or lumps.
Extraoral application:
For surface cleaning and micro-roughening treatment before pasting
metal/Porcelain
Fiber post
Inlay/Onlays
maryland bridge
Orthodontic bracket
removing the cement in the original adhesive layer before second pasting
Cast metal prosthesis defect detection
Application in oral:
In the repair treatment, micro roughen surface of porcelain or composite.